Manager


Manager - NA4M
Manager Notes

Reviews For: QRPGuys LED Tuning Indicator

Category: SWR & Wattmeters & Dummy Loads

eMail Subscription

Registered users are allowed to subscribe to specific review topics and receive eMail notifications when new reviews are posted.
Review Summary For : QRPGuys LED Tuning Indicator
Reviews: 2MSRP: 20
Description:
The QRPGuys LED Tuning Indicator is a standalone SWR 50 Ohm
HF bridge that can be used with your existing tuner if it
does not have built in SWR indication. It can also be used
without a tuner if you are adjusting your antenna for its
best resonance.
Product is in production
More Info: http://https://qrpguys.com/tuning-indicator
# last 180 days Avg. Rating last 180 days Total reviews Avg. overall rating
0025
K6SDW Rating: 2020-04-22
QRPGuys EFHW Mini Tuner works FB Time Owned: 0 to 3 months.
This kit is an endfed tuner with LED tuning indicator and it works FB. It definitely tunes a wire dipole, usually configured as a sloper.....check out the qrpguys website for details.

As to building the kit, there are 2 simple toroids to wind and qrpguys show plenty of photos what it should look like so I would rate this kit a little more difficult then just soldering components on a circuit board. At my age and eyesight I did have to use my Mr. Magoo glasses to find a cold solder joint...my bad! HI HI

The assembly manual such as it is is first rate and with plenty of photos and/or drawings.

Fun kit and it definitely tunes an endfed wire.

73
WX5DC Rating: 2019-09-02
Nifty Device, Fun Kit Time Owned: 0 to 3 months.
This little kit adds a tuning/SWR indicator to situations such as a QRP rig with no SWR indication and a tuner with no meter, like the MFJ-9201 QRP Tuner. When/if the light goes out, 1:1. Half brightness, 2:1. It also protects the radio while tuning in never having it experience more than 2:1. 10 W rating.

Great construction manual. A nice first kit for a new ham/QRP enthusiast.