| K7ZEM |
Rating:      |
2011-06-25 | |
| positive |
Time Owned: 0 to 3 months. |
cons: slow scan, power level is 5w, 35, and 50 on 2m. 5w, 25w, and 35w on 440. I miss the 10w setting. I cannot figure out the Busy Channel Lock out feature, it is supposed to block you from transmitting when someone else is, I couldn't get it to work. not that big of a deal.
PROS: 339.99 free delivery and no sales tax from HRO. It does not include the seperation kit but it can be purchased at Ham Radio Outlet for $40.00. Still cheaper that the Yaesu FT 8800. It does not have all the memory banks, ARTS, and other features I never use, it is a great bare bones full duplexing mobile. Did I mention how much I love the Crossband repeat! it's also capable of aprs upgrade. also, the microphone and cord and connector is way better than the yaesu. it has programmed memory scans, simpex scans, and tone scans, I've used these with no problem. it is very easy to program. The face can be put on upside down depending on how you want to mount it. I allways use an external speaker anyway, stock speakers on most of these small dual band mobiles have alot to be desired. it has a perfect time out timer that can be set for 90 seconds, which works well with my local machine. automatic power off. I love this radio. |
|
| K4KRW |
Rating:      |
2011-03-14 | |
| Great! - 5 years and counting |
Time Owned: more than 12 months. |
I have owned my DR-635 now for 5 years. I bought the remote mount kit for the control head. It works well. I do not have the digital voice or APRS modules. If I wanted to do APRS, I would spend the money and get the Kenwood TM-D710A. It is clearly built for the task.
I have found my DR-635 to be very easy to use. I use it almost every day. I normally use my radio in dual band mode monitoring both 2m and 70cm repeaters. I have used the cross band repeat capability and it works very well.
I have also used my radio to listen to aircraft frequencies and to the FM broadcast band when I was having problems with my car radio. Sound quality is pretty good. I do use an external speaker though (main unit is in the trunk).
This radio has done everything I have asked it to do.
I have experienced intermod at times. But not very often and it has never been big enough of a problem that I could not operate.
I did have to re-wire my microphone plug one time due to wear and tear. FYI: If you are transmitting and the radio starts beeping like R2-D2, check your mic cord/plug. In my case, I think the shield had loose strands touching other pins.
Other than that, it has been a trouble free radio and an absolute pleasure to use.
73,
Richard - K4KRW |
|
| K6SLR |
Rating:      |
2011-03-14 | |
| A sleeper hit! |
Time Owned: 0 to 3 months. |
Don't be fooled by negative reviews; this is a great radio, especially at the price.
First off, let me say that this is my first VHF/UHF radio. I did plenty of homework, researching all the available radios before choosing this one. Here was my criteria (in no particular order) and I've given some info on how this radio met this criteria.
1. Good RX/TX. The RX audio is quite good, although when I use it in my truck, it could be a bit louder but my truck isn't that good at blocking road noise. The TX audio so far has gotten good reports.
2. QRP possibility. This radio has three power steps, all easily accessed from one button. The lowest output is 5W.
3. Ease of use. I can't say enough about how easy this radio is to use, ONCE ONE READS THE MANUAL. This is true of just about anything. Yes, there is a point of intuitive devices where one should be able to get the thing up and running with a minimal amount of manual reading, but to really understand the features, one must refer to the manual. Once you do that, it's easy to navigate and use this radio. I've only had to refer to the manual a couple of times after reading it the first time and that was because I wanted to explore the more advanced features.
4. Well built. This radio is built like a tank. It's rock solid, even the fan has its own protective metal frame. The mic connector is a true connector instead of an RJ-x connector. The power leads are nice and hefty and overall the radio feels very solid. I haven't gotten around to mounting it in the truck yet so I just stash it behind on of the seats and it takes that treatment like a champ.
5. Affordable (for me). You can't beat the price. New, they sell for around $379. I paid $340 new. For all the features, it's a great price. If you find one used, even better.
A few things that I also like: the RX is fairly wide, but it can be narrowed. I do like how much can be received (weather, marine and aircraft, as well as the full FM broadcast bands).
I have not experienced any of the intermod issues that others have mentioned, and I live in a metropolitan area, so I'm not sure what's up with that.
I like how each memory channel can be programmed with specific repeater info which can be totally separate from whatever is set in VFO mode.
The scanning is superb. It actually has six separate scanning modes. When in VFO mode, three band regions can be individually programmed for scanning. At first this was slightly confusing and I was unable to get it to work the way I thought it should. But, after READING THE MANUAL again, it made total sense and the feature works great.
The squelch is not a problem. So it's a button...big deal. Yeah, a knob might be nice, but I set the squelch and leave it alone. Why? Because this radio has a really cool feature. There is a one-button MONITOR function that zeroes out the squelch, giving you a wide open tuning to the band. Push it again and it goes back to whatever you set the squelch to. I rarely need to change it.
This radio has open and free crossband repeat capability. Yes, you can get into some birdie issues but with a wideband receiver that you're asking to cross it's two radios (which this thing is...a duel receive, single TX radio that can also do U/U and V/V), you're bound to have a few birdies. Not a big deal.
Some other cool features that don't get talked about much:
1. Default repeater setting. You can program shift, tone, burst, etc. and have that be the default (until and unless you change it) and it's independent of the memory settings.
2. Call sign memory bank (for digital mode).
3. Display colors can be set to any of three colors. While this may seem like a totally useless thing, it's great. For example, I can set the transmit color to be different from RX and STBY so I have an immediate visual reference to the state of the radio. There is also a programmable dimmer setting.
4. Single band mode. The DR-635 can be set as a single band radio, choosing either 2m or 440.
5. Repeater time-out warning. Audibly alerts you to when the Timeout is imminent so you can re-key the repeater.
6. Theft alarm. In an interesting twist the radio can be programmed to call a specific frequency with a pre-programmed message if the radio is improperly removed from wherever you installed it. If the proper decode sequence is not entered, the radio will continue to transmit on the programmed frequency and lock out all other functionality. Couple this with APRS and suddenly you can see how this can be a great way to get back a radio that has been stolen from your vehicle.
I don't plan on using APRS, so I cannot comment on this functionality.
For a good 2m/70cm radio at a reasonable price, this one fits the bill.
|
|
| KF5HSE |
Rating:      |
2010-09-29 | |
| Beutiful Little Rig |
Time Owned: 0 to 3 months. |
Most of the problems others have had with this radio, have eluded me, thankfully. Being a new Ham, I am somewhat confused by menues but the 635 is fairly user friendly. The problems I have had with it have been user generated.
It is far simpler to use than my other rig, the Yaesu FT-897D.
I have heard some intermod but very little concidering that I live in Houston, Texas with a population of well over 3 million. |
|
| 108ID184 |
Rating:   |
2009-10-22 | |
| AWFUL reciever |
Time Owned: 3 to 6 months. |
Bought this rig nearly new from a friend locally who had bought a D-Star rig (yuk).
At first, very pleased - nice looking rig, easy to operate, easy to program. Nice TX audio and loud RX audio.
I wasn't bothered (although a little annoyed) at the mixing products that made certain (many) combinations of VFO frequencies caused birdies, as none of them affected me.
However, it became apparent that the adjacent channel rejection wasn't just poor - it was awful. The worst CB radios on the market in 1981 were better.
I was getting a repeater channel rendered unuseable by a repeater on the next channel up, which was 15 miles away from my house.
I changed to a 20 year old Icom, and it went away. Breathtaking that it can be outperformed by a rig 20 years older that doesn't even have a narrow channel spacing setting.
Contacted Alinco's UK imports, Nevada, who denied ever hearing of this problem! They've obviously never read this site.
Replaced it with a Yaesu FT-8800 (which is cheaper new than the DR-635) and have suffered no such problems since - and overall RX is much better.
Avoid unless it's very cheap and you stay in the middle of nowhere - I dread to think what this would be like in mobile use. |
|
| F0FXL |
Rating:     |
2008-12-19 | |
| It does what it is meant to do ! |
Time Owned: 0 to 3 months. |
Hi fellow operators,
This is my first review. I bought this radio used 10 days ago.
It is mounted in my car (using separation kit) and used with a small dual band mag mount antenna. I did not experience any intermod. issues until now. Even i drive every day a few kilometers around from a huge broadcast tower spitting about 1KW in the air.
To the rig : it has a solid constructing. When you have the radio body in your hands it seems to be built for heavy duty. I had no fear putting the transceiver body under the passenger seat.
The front panel is fitted with a large easy to read display and backlit keys. This is a plus when using the rig mobile.
The microphone socket is a real socket, like the one found on large base rigs. Not a flimsy RJ11 socket.
You can program the VFO so that when you tune accros the band certain settings are activated. usually you will program it so that shift and correct tones are activated when tuning onto the repeater band segment. Quite handy, and evolutive, who knows maybe one day the band plan will change. Some competitors rigs have the same feature, but you can not change the setting, it is factory set...
I love the fact that it has Narrow FM capabilities, since in my area all the repeater have been switched to NFM.
The display can be lit with three different colors. You can even program one color for RX, TX and standby. Sound like a gadget, but it can be useful if liek me you just have your microphone laying around in the car to avoid transmitting by sitting on it.
The DTMF microphone (which is now standard on european models) is a must have to for mobile operators. You can drive all the main functions from the microphone. It also allows direct frequency input.
I always had good reports with this rig, and i'm able to work almost any station i heatr; This rig definetly has all a newbie like me needs to get QRV on mobile.
I wish Alinco will come up with a D-Star module soon !
To G6XGJ, the procedure to turn it to an APRS beacon is pretty well documented in the TNC module manual and in the rig manual. |
|
| G6XCJ |
Rating:  |
2008-11-06 | |
| UNFIT FOR PURPOSE! |
Time Owned: more than 12 months. |
As an avid UIV32 man this rig was bought solely for APRS Use. All directions in the manual have been followed including the fitting of the cable to the GPS on the TNC for power/voltage. TNC guide has been followed checked and re-checked and all is etup correctly yet where does one plug the GPS?
Imv, Alinco have made a huge mistake here and i will bin it soon as i cannot fathom how to fit the GPS to the unit (GPS2 in a Byonic product and is exceptionally good in use with 710E).
The box was sold to me NEW as an APRS rx/tx.
Despite all the remarks below, none have said how they fit the GPS! |
|
| K8UPE |
Rating:      |
2008-04-16 | |
| Great Rig |
Time Owned: more than 12 months. |
| Well I have owned the 635 for over a year now and I have to say I am impressed. I ordered the TNC unit for it and installed and got it up and running without a problem. Does just fine on both 2 meter and 440. Cross band banding is great, until you accidentally cross band two repeaters, but that was operator error hi hi. As far as intermod goes I have none. Use it as a base out in the country. Although it does get hot when cross banding the fan does cool it down. to be safe I use another muffin fan. The only complaint I have is the squelch, wish it had a squelch knob instead of a squelch menu. Great rig for the price. Recommend it to anyone looking for a TRUE dual bander. |
|
| W8LHT |
Rating:      |
2008-03-03 | |
| Great Radio, Great Value |
Time Owned: 0 to 3 months. |
| I recently replaced a 31 year old Yaesu FT-227R 2M rig (no pl) with the DR-635, and have been completely satisfied. The radio was easy to program (unlike what I've read on the Yaesu 88/8900 menus), the buttons are lit and easy to see at night (unlike what I've read on the Yaesu 88/8900), the audio reports are good, and the receiver is very sensitive (which I've read may create some intermod problems in highly populated areas), but I've had no problems. I had to call AES to get the procedure to do cross-band repeat (which also was very easy), and that function works great! Nice radio, good value, compact, and very easy to use. |
|
| KC5SII |
Rating:      |
2008-01-06 | |
| It's a great Radio |
Time Owned: 6 to 12 months. |
Make no mistake about it; you can't beat this radio for price and performance. I would recommend this radio to anyone looking for an entry level true dual bander. I commute about 170 miles daily and put lots of hours in with this rig. I love it.
The intermod issue is real, but not a real problem. I had some intermod, but less, with a Kenwood D-700 installed. The 635 has all the features most will ever use and rock solid transmit that will not let you down. It’s simple to learn and use with only a few compromises that most will never discover.
However, if you plan to do APRS and voice with this rig you will have to live with some more obvious compromises. Beyond that, there are things, on the APRS side, that just don't seem to work as advertised. None of them are show stoppers for me.
If you aren’t already knee deep into APRS, you may never get this radio up and running on APRS with the internal TNC. Once you buy the radio and the TNC you can almost meet the price of a D-700.
Support from Alinco would help but, that's not somthing anyone should count on. I know the internal TNC is after market. There are APRS functions built into the radios settings. That tells me it should work with the TNC sold with the radio. I think Alinco owes the users some sort of fix or at least an explanation. No, I'm not holding my breath... but it would be nice.
73,
Dave, KC5SII |
|