Callsign	Required
Password

If you've forgotten and/or need to reset your password, please enter your Callsign and use the button below.

If you are not a member of the eHam community

Please consider registering to e-Ham.

Manager

Manager - NA4M
Manager Notes

Reviews Home

Reviews For: DX Engineering RPA-1 Receive Preamp

Category: Receive Pre-amps

eMail Subscription

Registered users are allowed to subscribe to specific review topics and receive eMail notifications when new reviews are posted.

Review Summary For : DX Engineering RPA-1 Receive Preamp
	Reviews: 12	MSRP: 109.00
	Description: The RPA-1 provides exceptional performance from 0.3-35 MHz operating range. It's push-pull amplifier design and robust components enable it to withstand high signal levels and operate when you need it most. It is easily bypassed by turning it off.
	Product is not in production
More Info: http://www.dxengineering.com
# last 180 days	Avg. Rating last 180 days	Total reviews	Avg. overall rating
0	0	12	4.8

N4GG	Rating:	2008-02-01
Excellent			Time Owned: more than 12 months.
I have two of these running in a very demanding SO2R setup. The DNR is the best on the market. Noise figure is nice and low. Gain is adjustable if you need - change two resistor values. A really excellent desing and quality manufacture. The integral bypass relay is helpful as well.

NJ6D	Rating:	2008-01-26
Excelent Product			Time Owned: more than 12 months.
A very good pre-amp for my beverage antennas. Low noise and handles strong signals from local broadcast stations without a whisper of distortion. I have several AM broadcast towers within line of sight of my QTH. The strongest by far is our local PBS station KUAT running 50KW during daytime hours. With no antenna on the receiver this station is s9+40-50 db. The RPA-1 handles my conditions with flying colors. I hear no spurious products at all coming from the pre-amp. I will no doubt add more of these as my receive farm grows.

Category:

Receive Pre-amps

Product:

DX Engineering RPA-1 Receive Preamp

Summary:

Rating:	Time Owned:
Great! Good OK Needs Help Poor Awful!	0 - 3 Months 3 - 6 Months 6 - 12 Months More than 12 Months

Remarks:

Describe your experience with the DX Engineering RPA-1 Receive Preamp and tell us why you give it the rating you did (required). Other useful information would include your experience with similar products, infomation on a product that you would purchase instead of this one, and so on.