| WA3UOO |
Rating:      |
2011-11-19 | |
| Best Digital interface available |
Time Owned: more than 12 months. |
| Purchased mine December 2009. Received excellent customer service and support from Clint. Now I find myself needing a new interface cable for the upgrade I just purchased- an FT-950. Clint had the cable in stock and shipped it the same day; Saturday no less. Installation of the supporting software and files and documentation takes some time, but if you take the time to read the instructions and take it step by step, it's not very difficult. I am using mine with HRD 5.0 beta and the Navigator works like it was made for HRD. Between the two, this has got to be among the best setups for computer assisted control of rigs and digital modes. This is very well built and engineered product which becomes evident when you open the box and examine it. Control knobs, for example, are setscrew types. Not low cost push-ons like I see on many products these days. Connectors on the rear panel are quality parts. The inside of this gem is amazing. I can fully recommend this product. That said it is not a low cost, cheap product. You get what you pay for and this digital interface delivers. Dig a little deep and you will be very happy. |
|
| K3ROJ |
Rating:      |
2011-11-17 | |
| The ideal interface |
Time Owned: more than 12 months. |
I remember the developer of of US interface living not far from me in Maryland. Seemed like a lot of money at the time but was well worth it. Now I see the makers of Rigblaster is coming out with their "Advantage" unit which seems to be just like the US Interface. I need neither unit now since we use the ultimate radio for digital modes, the Flex Radio 5000A which uses virtual audio cables making for cleaner audio.
|
|
| K3DCW |
Rating:      |
2011-09-23 | |
| Top Notch Product!!! |
Time Owned: 6 to 12 months. |
I've used a variety of interfaces; from the SignaLink USB to the microHam USB Interface III & microKeyer II to the Navigator; both with a Yaesu FT-950 and an Elecraft K3, and on Windows and OS X. By far, the Navigator rules the roost.
The Navigator is built like a tank! The fit and finish on the unit is outstanding and the quality of the connectors, pots, LEDs and knobs are all top-tier. When you make an adjustment on a control, you get solid feedback and you can know that it will stay set until you make a change again. The cables ordered from US Interface for rig control are well made; however, if you want to make your own cable to save a few $$$, Clint provides schematics supporting most receivers.
I've used this interface with just about every program imaginable, and they all work wonderfully with no hiccups. From Fldigi, RUMlog, RUMped, SkookumLogger, Aether, MacLoggerDX, and more on OS X, to Ham Radio Deluxe, KComm, Digipan, JT65-HF, WSJT9, WSPR, MRP, Fldigi, N1MM, and more on Windows 7, the Navigator handles EVERYTHING you can throw at it with ease.
A VERY strong positive for me is Navigator's 100% support for Apple's OS X. All Mac ham radio programs can use this interface for full control of your rig. The CAT control, WinKey, and FSK keying all work 100% on OS X. Unlike other multifunction interfaces that require a third-party program for partial functionality on a Mac, all of the Navigator's functions are fully supported in OS X. Kudos to Clint for supporting the Mac ham radio community.
The Navigator is also supported by an email support group on Yahoo Groups. This group is noteworthy because of the relatively light message load. This isn't because of a lack of members, but rather it is due to a lack of problems with the Navigator. When a problem does creep up; however, Clint is quick to provide feedback and solutions to help out those in need.
In closing, if you are looking for a hi-quality multifunction interface with superior performance and ease of use, look no further than the Navigator. It may be pricier than most interfaces (although less than some) but it is worth every penny you spend and will last you for years and years. |
|
| K6DHP |
Rating:      |
2011-02-19 | |
| Great Service, Superb Product! |
Time Owned: 0 to 3 months. |
Have been using a Rigblaster Pro for about seven years. It is a good product, but the Navigator is clearly the next step - an all in one solution with fewer cables and a more elegant design. As others have said, if you want the best, you can go first class for just a few dollars more and get it with the Navigator. I just bought a new model with the new black finish and the latest WinKey chip. The Navigator comes with good installation instructions. Clint is very helpful and has promptly answered all my questions. I highly recommend this solution for using the digital modes!
73 de K6DHP |
|
| K7NG |
Rating:      |
2011-02-18 | |
| Excellent in every way |
Time Owned: more than 12 months. |
I bought a Navigator used based on Eham reviews, and the reviews are spot on! If you take time to carefully read the instructions and don't get into a hurry so when / if things don't quite go right you can say "What did I do wrong?" and back up a step, you'll have a perfect station control / interface.
The adjustable audio inputs and USB-based controls work flawlessly, at least with WinXP. I've run into some software applications that don't play well with each other, but it's never the fault of the Navigator. EVERY problem pointing to the Navigator I've had has been due to my own mistakes.
Clint will sell you a rig-specific interface cable at reasonable price and delivered quickly. Custom interface cables aren't a problem, and it really isn't like you couldn't make your own if you wanted to... I just don't like working with mini-DIN plugs so I buy my cables from Clint.
I work CW, and because the Navigator has the Winkey built in, I don't need anything else but my paddle.
I'm in the market for one or two more of these great boxes. |
|
| W2EG |
Rating:      |
2011-01-21 | |
| Excellent interface; GREAT support |
Time Owned: more than 12 months. |
A fellow member of my contesting club, in recommending the Navigator, referred to it as "the Cadillac of interfaces." Now that I've owned one for nearly two years, I see what he meant. This made-in-the-USA interface is top notch all the way. It is well constructed of high quality components and materials (no cheap plastic case or wobbly-shafted pots here).
I use it very happily with my new K3 as I did previously with my Omni 6+. I do a fair amount of contesting, operating mostly CW and some digital modes. The Navigator has all the features I could want, including the WinKeyer USB keyer.
I first got mine about the time Glenn, W3GWW, became a silent key. Clint, KK7UQ, stepped right up and gave me all the help I needed to get set up and running on PSK, at that time a new mode for me. I have found Clint a pleasure to work with and unstinting in his time and assistance. He was always easy to get hold of and responsive to my questions. Recently, I got a new computer (running Win 7, 64 bit) and Clint was once again a big help in getting things up and running. (I should add that the Navigator works just fine with my new computer OS.) Clint also helped me with a custom cable for my TM-255A, interfacing with the DIN socket on the radio, while still allowing me to use the radio to key my 'brick' two meter amp. Clint was happy to send me (at no cost, of course), a CD with some updated software. (You could, I think, also download it on the web site.) It is good that the support is there to keep this unit up to date.
Although this company does not (I believe) advertise in QST, I suggest they are very worthy of your consideration. Look on their site; compare prices and features. This 'Cadillac' is not so expensive relative to other choices, considering what you get. It is the last interface I expect to own.
Finally, I add that I have no interest in this company, nor do I know (personally) anyone associated with the company. I'm just another well-satisfied customer.
|
|
| W2PK |
Rating:      |
2011-01-20 | |
| Top-notch service matched by top-notch product |
Time Owned: more than 12 months. |
| Have had my Navigator for a few years, but recently changed computers and needed some assistance from Clint to get it comm-ported and set up properly. Over the course of two days, he spent probably an hour in not only getting everything working perfectly, but alsao introducing me to the Navigator's WinKey capability, a function that had always been somewhat of a mystery to me. I cannot think of another product - anywhere, of any kind - that is supported by this kind of service. It's beyond outstanding. |
|
| N6KZB |
Rating:      |
2010-09-21 | |
| Wow! What a find.... |
Time Owned: 0 to 3 months. |
Solved all my soundcard needs and cleaned up cable mess too............
Within 30 minutes we were up and on the air. Followed the quick guide and the software installed just fine. All drivers assigned com ports. Then I went in and changed them to fit my needs. Real easy in Win7, and it remembers the ports when I boot up.
Now running my RMS software, MixW, and Airlink Express. All levels are set correctly. I just leave the computer sound settings at 100%, (where they always seem to default back to anyway), and I just use the 2 front panel controls on the Navigator for proper ALC and RX audio in. Rig control works well too, one USB cable is doing it all now.
The cables provided were really plug -n- play and worked with the Icom 756Pro3 as advertised.
The Navigator replaced my Signalink and Rig Blaster, which are good products, but didn't fit my particular needs.
I want to thank the company for a great product, and have to add that Clint, KK7UG, was very helpful on the sale and provided good information.
Final note, the old adage is true... "you get what you pay for"........
Adios, Mike n6kzb (xe2) |
|
| KF2GQ |
Rating:      |
2010-08-15 | |
| Two are better than one |
Time Owned: more than 12 months. |
| I had my first Navigator since March of 2007. With the help of Glenn W3GWW, before he became a SK, I was on the air in the digital modes. Recently, I came upon a fellow ham selling his Navigator, and I brought it. The second Navigator is in my go kit along with the cable set for my brand of radio, that I purchased from Clint, KK7UQ. The level of customer support that I have encounted from this company, is far and above those of other company's in the same field. |
|
| WM5DX |
Rating:      |
2010-01-29 | |
| No more Tylenol. |
Time Owned: 0 to 3 months. |
I have operated RTTY since the mid 90's using various equipment. Everything I have used, including one of the most popular interfaces, has been a pain to set up and get running, and keep running when changing radios or software. Gave me grief and headaches.
I bought the Navigator about a month ago. The software was easy to install and it set itself up with virtual com ports exactly as the manual said it should. I am really dumb when it comes to the technical aspects of setting up my logging programs so I called Clint for help. He gave me great guidance and talked me through every step.
I am using the Navigator and non pro Icom 746 with DX4WIN,MMTTY, Writelog, and Writelog with the MMTTY plug in. It does everything it should on every program.
I took digital photographs of every software setup screen for future reference.
I operated in the BARTG Sprint last weekend and ran a couple of hundred QSO's just loafing along for a few hours. The Navigator and software worked flawlessly. Decoded signals that I could hardly hear. Best piece of digital equipment I have ever owned. My shack is now devoid of a rats nest of cables and finally looks tidy. With previous interfaces I have had to label every cable and connection to the interface, computer and radio just to know where to reconnect if I move things around. Not anymore. I also notice that on some of the RTTY reflectors there a some pieces of equipment that are always coming up with queries by the owners who are having problems but I never see queries by Navigator owners. Go figure.
A great piece of equipment and terrific backup by Clint. |
|