Manager


Manager - NA4M
Manager Notes

Reviews For: Weston Electronics

Category: Amateur Radio Equipment Repair

eMail Subscription

Registered users are allowed to subscribe to specific review topics and receive eMail notifications when new reviews are posted.
Review Summary For : Weston Electronics
Reviews: 25MSRP:
Description:
Repairs for all types of amateur radio equipment, boatanchor to modern. Please check out our website.
Product is not in production
More Info: http://www.westonelectronics.com/index.html
# last 180 days Avg. Rating last 180 days Total reviews Avg. overall rating
00255
WA4SHA Rating: 2009-07-01
Excellent Service Time Owned: 0 to 3 months.
I bought an older Yaesu FT-757GX on e-bay. A month later, the display suddenly started flickering, and then the whole system shut down. I couldn't get the radio to come up at all. I read very positive reviews of Weston Electronics, so I e-mailed Jim and described the problem. He was quick to point out that, while he was certainly able to service the radio, some display problems on that model are not repairable. With that caviat, I sent it to him. Two weeks later (just as he said), Jim e-mailed me the results: he found one bad part and several bad solder joints. He also did an alignment and replaced the memory battery, as well. I used PayPal (very convenient for me) to pay him, and I got the radio back two days later.
I was very pleased. I got it back in time for Field Day. That's a nice receiver. Also, I had no trouble making 10 and 20m contacts with my vertical dipole.
To top it all off, Jim followed up via e-mail to make sure all was OK. As a retired service rep, I have seen both good and poor service. This is as good as it gets.

Fred WA4SHA
WA2QIC Rating: 2008-10-03
Top notch Time Owned: 6 to 12 months.
My Yaesu FT-736R developed what seemed like a cut-out problem on 440. Jim figured out that the rig was actually jumping 20khz after a few minutes of warming up. This was a tough problem to troubleshoot, but Jim hammered away at it until the problem was isolated, and ultimately repaired. I also asked him to re-align the rig while he was at it, and I'm glad I did.

The rig arrived today, and I immediately put it to work. Signal reports on 2m simplex and repeaters as well as 440 repeaters were all very good and it was noted that the rig sounded better after repair/alignment than before. And most importantly...no frequency jumping!

Considering the level of difficulty in isolating the specific problem, Jim was more than fair with billing me for the repair. Communications from Jim were good, and he did everything he said he would. And unlike another repair outfit I have used in the past, this radio was returned to me exactly as I sent it.

A totally professional job.
WA2MBP Rating: 2008-09-07
FT-2000 Repair Time Owned: 6 to 12 months.
Jim is a fair and honest man and runs a very modern repair service in central, GA. During Field Day this year, we had a lightening strike about 50 yards from our CW tent. We had N1MM logging SW running and networked between our radios for 'Multi-Multi' type logging. Well, the lightening surge came in through the RS-232 port and killed all com via that port. It wasn't until Jim received my FT-2000 and diagnosed the problems that I knew the full extent of the strike! Both RX Preamps were blown and the Sub RX Quad amplifier was blown. Jim was able to obtain the parts quickly, repair the radio and met me on my way back from visiting my daughter at school in Auburn, AL. What Service! Jim knows his stuff and was able to diagnose the modern com problem as well as the RF side of the problems. I was initially concerned that the modern Yaesu FT-2000 equipment would be expensive board swap only, but Jim has modern Surface Mount capability to diagnose and replace to the component level.
WB4OMM Rating: 2008-08-10
Great Service! Time Owned: more than 12 months.
I had two radios (Yaesu FT-767GX, and FT-757GX) that were ready for service. After surveying several other "shops", I found Jim to be reasonably priced (and close - I'm in Florida, he's in Georgia). Jim responded via e-mail quickly, he serviced the radios prompltly, and the turn around was less than 3 weeks - compared to my last service that cost double, and took almost 8 weeks. I also got the impression he is honest, and will do the job right regardless of the time it takes (and not charged!!). I'll be sending a few more his way shortly. I highly recommend Jim.
Steve Szabo WB4OMM
KK7YC Rating: 2008-07-14
TS830s Repair Time Owned: more than 12 months.
All I can say is wow!!!! sent Jim my old TS830s he fixed it up, aligned it and had it on it's way back with in two weeks after he received it. As good as new!I(maybe better)his fee was very reasonable, he was great at communicating via e-mail and you can bet that I will use Jim again.

Thanks Jim
KF4CZV Rating: 2008-03-27
I'll be back! Time Owned: N.A.
Prompt, Reasonable, Knowledgeable and Honest! What more could you ask for? I have several more radios I'm planning to send his way!

Terry Hicks
KF4CZV
WA3YKD Rating: 2008-03-27
Very good and very prompt Time Owned: more than 12 months.
I was very pleased with the repair work and also the fact that Weston kept in constant contact with me by e mail so I knew what was happening and when.
I would certainly recommend Weston to anyone needing repair work.
KD4CL Rating: 2007-12-31
Excellant Time Owned: more than 12 months.
Repaired a FT 1000. Did a great job, With a very fast turn around,very up front and honest.
WB4GWA Rating: 2007-12-26
Repair Time Owned: more than 12 months.
Smoked my HP spectrum analyzer.....Called Jim..No worries. He fixed the thing and put all the smoke back into it in a jiffy. Great service and great workmanship. Jim is a pro. He can get to the nitty gritty of what is wrong and get you back on the air. He has worked on several things for me.... I would use his service before ANY factory service....
KI4KHI Rating: 2007-12-04
IC-820H Base 2m/440 Time Owned: more than 12 months.
Weston Electronics is where I will have all my Ham Radio Equipment repaired. Jim took the time to find a very difficult problem in my Icon 820H Base and fix it at a most reasonable price. The radio is now back to 100% operation.