Callsign	Required
Password

If you've forgotten and/or need to reset your password, please enter your Callsign and use the button below.

You *must* have a verified email address on the account.

If you are not a member of the eHam community

Please consider registering to e-Ham.

Manager

Manager - NA4M
Manager Notes

Reviews For: Juma RX1

Category: QRP Radios (5 watts or less)

eMail Subscription

Registered users are allowed to subscribe to specific review topics and receive eMail notifications when new reviews are posted.

Review Summary For : Juma RX1
	Reviews: 3	MSRP: 74.80 Euro
	Description: Receiver kit works in conjunction the TX1 transceiver,to be a 5 watt DDS Controlled transceiver set.Both the RX1 and TX1 can be build as stand alone units.The kit is all SMD parts with no coils to wind.The units are for both 40 and 80 metre's
	Product is in production
More Info: http://www.jumaradio.com
# last 180 days	Avg. Rating last 180 days	Total reviews	Avg. overall rating
0	0	3	5

VA7ION	Rating:	2010-10-06
Excellent work!!!			Time Owned: 0 to 3 months.
Excellent design, easy to build, and upgradeable ;) I wanted to get a feeling of Juma quality without spending too much money before plunging into heavy stuff. They pass the exam with an A+, now I'm ready to buy the all bands transceiver and the 100W linear. It worked without a glitch right after I connected the power supply. Adjustments are a breeze. --- 73 --- Ion VA7ION

PD0PSB	Rating:	2008-11-09
a pleasure to build			Time Owned: 0 to 3 months.
A superb kit from Finland! At first I was hesitative to build a SMD kit, but in fact with a normal small soldertip it was quite easy to do. The manual is VERY thorough, components are all clearly labeled and you get a good deal of RF education for free. For me it was a "one-go-kit", when finished the RX came to live immediately. It is a big surprise that a seemingly "simple" design has such a receive quality. Matti & Juha did their homework very well. Clean VFO,clean audio,good PIC-programmed user interface, good sensitivity and a very surprising dynamic behaviour of the switching HEF mixer! No broadcast breakthrough, no problems on 40m next to strong BC stations. As this kit doesn't use dedicated IC's in the RF part it is easy to add your own extras (like CW bandwidth/adjustable AGC/etc) Building this kit should be your hamradio exam... Excellent!

VE7PRJ	Rating:	2008-01-01
Great little receiver			Time Owned: 0 to 3 months.
This was my first attempt at SMD parts kit,once you get around doing the DDS chip all the other components are relatively easy.You just need to take your time and make sure you put the parts in the correct spot and in the correct orientation. The kit was a challenge at first but as work on it progressed it became very easy to do. The radio came to life first time with no problems just a couple adjustments required,the AGC threshold voltage and trimmer R42 in the LO buffer amplifier to fine tune the unit. Look forward to doing the TRX2 Transceiver.

Category:

QRP Radios (5 watts or less)

Product:

Juma RX1

Summary:

Rating:	Time Owned:
Great! Good OK Needs Help Poor Awful!	0 - 3 Months 3 - 6 Months 6 - 12 Months More than 12 Months

Remarks:

Describe your experience with the Juma RX1 and tell us why you give it the rating you did (required). Other useful information would include your experience with similar products, infomation on a product that you would purchase instead of this one, and so on.