Manager


Manager - NA4M
Manager Notes

Reviews For: Breedlove Antenna Mounts

Category: Antennas: HF Mobile & Accessories

eMail Subscription

Registered users are allowed to subscribe to specific review topics and receive eMail notifications when new reviews are posted.
Review Summary For : Breedlove Antenna Mounts
Reviews: 53MSRP: 85
Description:
Breedlove Machine makes a variety of mobile antenna mounts which are
machined from solid brass. The one shown is their ballmount with an
included quick disconnect.

They also make stake pocket mounts, and high-voltage insulators for use
with auto-couplers.
Product is in production
More Info: http://breedlovemounts.com
# last 180 days Avg. Rating last 180 days Total reviews Avg. overall rating
00534.8
KJ6ETL Rating: 2012-04-24
Real brass Time Owned: 0 to 3 months.
I needed a Quick Disconnect to (un) mount my balcony antenna and ordered a QD from Breedlove. Absolutely perfect!
WD9ICU Rating: 2012-04-22
Heavy duty quality Time Owned: 0 to 3 months.
I bought 3 of the QD mounts, 2 large and 1 small. These exceed my expectations . A heavy duty quality mount that I will have forever. USA made quality is hard to get these days. I recommend, you will not be disappointed.
AJ7LL Rating: 2012-04-21
Good Stuff!!! Time Owned: more than 12 months.
I've put Breedlove mounts to use on my truck for HF. They're extremely well made and not exorbitant in cost. Highly recommended. I do some metalworking with lathe, mill, etc. and FWIW I assure you his work is really good. I especially appreciate larger bolt/thread sizes whenever possible, moving to the ubiquitous 3/8" only at the last to accommodate commercial gear. Standoff for whip antenna is long enough to get a reasonable loading coil around, too.
It ain't made in C****, folks!
N7GCO Rating: 2012-04-16
Outstanding! Time Owned: 3 to 6 months.
I have purchased a number of antenna parts from Breedlove. The construction detail is outstanding. I would highly recommend them to anyone wanting quality.
WD0FIA Rating: 2012-02-08
Built to last! Time Owned: more than 12 months.
I wish I had bought these the first time! I got my first Jerry Breedlove Antenna Mount in 2010 for my new Mustang. Since then I have purchased 4 more, and replaced the existing mounts on my other vehicles! These are durable, functional, and outright works of art! I have no doubt they will outlast the vehicles they are installed on!

The mount is solidly built, electrically and mechanically. Fit and finish make it look as well it works. Your antenna will only work good if it has a good mount, and these are the BEST I have ever found.
K0FTC Rating: 2012-02-02
EZN pocket mount, regular and mini quick disconnect Time Owned: 0 to 3 months.
After ordering I recieved a well packaged EZN pocket mount, as well as the regular and mini quick disconnect in two days, priority mail. I have to agree with other comments, really outstanding workmanship, hefty - solid devices, and fits my Ram truck perfectly. He has taken the angle of the bed in this new truck into account and the Chameleon antenna is perfectly vertical when attached to this mount. These are well done.
N9NAQ Rating: 2012-01-15
Quality superb Time Owned: more than 12 months.
Wow. I started mobile with the Hustler series of antennas and began with a cheap ball mount by others that was not at all up to par. I needed help because I already had cut a big hole in the van!

Hank basically made me a custom ball mount to fit the hole that I already cut in the vehicle and it worked very well. I used the quick change ball top for that configuration.

Later on I changed to a Larrys screwdriver antenna. For that I need to only change one thing on my setup which was to use the flattop mount. It was an easy change for me and not expensive for him to make. He is great to deal with even if your needs evolve.

73 de N9NAQ
AB4D Rating: 2011-10-06
Built to Last Time Owned: 0 to 3 months.
There is not a whole lot more I can add about the quality of the mounts from Hank Breedlove Machine Shop. I purchased a Flat Top Ball Mount, a Quick Disconnect Mount, and a EZ Over Antenna Mount.

All are strong mounts, machined from solid brass, that should last a lifetime. On the Flat Top Ball Mount, I needed a 1/2 inch thread on the antenna side of the mount to support a GS4 screwdriver antenna, rather than the more common 3/8 thread.

Hank had no issues supplying what I needed at no extra cost, Bravo! If you are looking for a strong antenna mount that will last, look no further than Breedlove Machine Shop.

73
W9RRR Rating: 2011-08-23
OMG! Now THAT's an antenna mount! Time Owned: 0 to 3 months.
I bought two of Breedlove's $25 straight pedestal mounts. I opened the shipping box and was blown away by the quality of these mounts. They are machined from a solid piece of high strength aluminum and will still be usable when everyone reading this review is a silent key!
WB3IGR Rating: 2011-04-25
Great mount Time Owned: 0 to 3 months.
After playing around with antenna mounts for my Ford F-150, I was ready to give up. I was referred to Breedlove Machine Shop antenna mounts in NC. I bought the truck stake hole mount model (EZN). And it works great right out of the box! I now have a good ground and my Little Tar Heel II screwdriver works the way it was designed to. I would rate this mount 5 PLUS!!!