Manager


Manager - NA4M
Manager Notes

Reviews For: WaveNode CS-1 Remote Sensor for 0 - 2000 watt range and 1.8 -

Category: SWR & Wattmeters & Dummy Loads

eMail Subscription

Registered users are allowed to subscribe to specific review topics and receive eMail notifications when new reviews are posted.
Review Summary For : WaveNode CS-1 Remote Sensor for 0 - 2000 watt range and 1.8 -
Reviews: 1MSRP: 65.00
Description:
CS-1

Frequency range: 1.8Mhz - 60Mhz

Output voltage: 1Volt RMS at 100 watts

Output impedance: 50 ohms

Range: 0 -2000 watts continuous
Product is in production
More Info: http://www.wavenode.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=W&Product_Code=CS-1
# last 180 days Avg. Rating last 180 days Total reviews Avg. overall rating
0015
WW8J Rating: 2010-02-25
WaveNode is Quality Time Owned: 0 to 3 months.
A new item from Wavenode is the CS-1, an RF Sensor designed to provide coupling to an external oscilloscope. According to Alan Burroughs of Wavenode, the decision to release the new sensor was do to an increasing number of customer requests for this item.

I purchased the CS-1 specifically for monitoring/tuning PSK output, as well as other modes while using a Tektronix 465 oscilloscope. The insertion loss is very low, about 0.01%, and the sensor still provides high output signal for monitor devices that must have 1 Volt PP to operate properly. This unit may be ordered with standard SO 239, or N type connectors. Although a similar device could be built for a little more than the cost of a parts box, and connectors, I think the Wavenode CS-1 is a good value at the current retail price.