| Review Summary For : Ham Sphere v 2.0.19 (Jan 2010) | |||
|---|---|---|---|
| Reviews: 7 | MSRP: 21 Euros / year [after 7-9 day t | ||
| Description: VoIP program for Internet-based QSO's (similar to CQ100); presents realistic HF signals, with QRM; ARRL audios, "number stations" & a program about the last type; includes 6m & 11m bands & a 6 MHz HF "BC" band, as well as text-based Chat (like EchoLink's). Extracts from Maker's Feature list: SSTV and digital modes won't work well on HamSphere 2.0 ... CW is implemented in this release. New Features are: Firewall friendly TCP driven audio. New S-meter New progressive VFO Memory channels Dual filters 3.8 kHz and 2.8 kHz 10 Ham Bands plus one Broadcast Band (BC) band Channel step up/down 1 kHz frequency step up/down Jitter buffer latency control to keep the TCP latency to a minimum. DSB Modulation. (CW in next real release) Simulation on/off. Shuts down the noise and QRM. PTT with PTT hold. Volume level knob Transmitter Power level knob Mic level knob Chat Improved DX cluster Hot frequency select direct from cluster and FFT. Keyboard shortcuts for most functions Direct frequency setting with keyboard or keypad. New codec with a lot lesser bandwidth requirement. KEYBOARD SHORTCUTS ================== F1 PTT ON/OFF F2 Filter 1/2 F3 VFO/Memory F4 AGC slow/fast F5 Sim on/off F6 Help F7 Dir freq input F8 PTT Hold on/off F9 Bring up audio Mixer F11 Quick key /USERS Gives the number of users logged on F12 Quick key /USERS QRG or BAND (Toggles between them) In CW Mode F1-F8 short keys with programable QSO phrases. DEL Delete mem pos down = 1 kHz down up = 1 kHz up CHAT COMMANDS General commands ============== ping - Checks the connection with the server. Only works when logged out. /help - This text /invisible - Invisible mode /visible - Visible mode /agc1-3 - set different AGC /clear - Clear cluster /users - Get total number of users /users all - List all users on the system /users band - List all users on this band /users qrg - List all users on my frequency /private callsign msg - Send a message to a user /lookup callsign - Get info about a callsign /qrz callsign - Lookup callsign on QRZ.com /dsb set DSB mode /chatmode 0 - Set global chat, all chat messages are seen. /chatmode 1 - Set band chat, all chat messages from users on the same band /chatmode 2 - Set Freq chat, all chat messages from users on the same frequency CW commands =========== /cw set CW mode /f1-8 Store CW fast keys. i.e. /F1 CQ CQ CQ DE 5B4AIT K /speed WPM (where wpm is words per minute between 10-34) /offset hz (where hz is the tone offset between 100-1000 hz) Special CW keys + = AR @ = SK () = ? ! / Audio commands ============= /devices - List available audio devices /play 0 - Set playback device 0. You can change this whenever. Output will change on the fly. /record 1 - Set playback device 1. You can change this whenever. Input will change on the fly. Make sure you use the mixer by hitting F9 in order to assign the microphone and set its level for each device. Audio settings will be stored in the config file. Note! Set maximum mic level to end ALC scale. You can test the microphone level by using HamSphere's Echo-Server. Tune the 6 meter band and the frequency 50.12345 Set the microphone level, press PTT and speak into the microphone. 1 second after you have released the PTT, the server will play your recorded message back so you will get an idea about your audio quality and levels. Up to 1 minute audio will be echoed back. | |||
| Product is not in production | |||
| More Info: http://www.HamSphere.com | |||
| # last 180 days | Avg. Rating last 180 days | Total reviews | Avg. overall rating |
| 0 | 0 | 7 | 2.6 |
| ||||||||||||
| ||||||||||||
| ||||||||||||
| ||||||||||||
| ||||||||||||
| ||||||||||||
| ||||||||||||